Dell PowerConnect 3248 매뉴얼 - 페이지 19
{카테고리_이름} Dell PowerConnect 3248에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 3248 42 페이지. Powerconnect 3248; powerconnect 5224
Dell PowerConnect 3248에 대해서도 마찬가지입니다: 기능 목록 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Note that a secure port has the following restrictions:
•
It should not be connected to a network interconnection device.
•
It cannot be configured as a member of a static trunk.
•
It can be configured as an LACP trunk port, but the switch does not
allow the LACP trunk to be encabled.
NOTICE: A port that is already configured as a LACP or static trunk port
cannot be enabled as a secure port.
Switch 3248: Port Security Configuration
On the Ports/Port Security page, you can enable/disable security for any
switch port. For each port number listed in the Port column, you can
configure the following parameters listed by column name on the screen:
•
Security Status — Enables or disables port security on the port.
(Default: Disabled)
•
Intrusion Shutdown and Trap — Indicates the action to be taken
when a port security violation is detected:
–
None: Indicates that no action should be taken. (This is the
default.)
Trap: Indicates that only an SNMP trap message be sent.
–
–
Shutdown: Indicates that only the port should be disabled.
–
Trap and Shutdown: Indicates that the port should be disabled
and an SNMP trap message sent.
NOTICE: If a port is disabled due to a security violation, it must be manually
re-enabled from the Ports/Port Configuration page. See "Switch 3248: Re-
Enabling a Shutdown Port" on page 20.
To save any changes you make in this page, click Apply Changes. If you do
not want to save the changes, click Refresh.
Addendum to the 3 248 and 52 24 User 's Guides
19