Dell PowerConnect 3248 매뉴얼 - 페이지 18
{카테고리_이름} Dell PowerConnect 3248에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 3248 42 페이지. Powerconnect 3248; powerconnect 5224
Dell PowerConnect 3248에 대해서도 마찬가지입니다: 기능 목록 (2 페이지), 사양 (2 페이지)
페이지 인쇄
18
Addendum to the 32 48 and 5 224 User 's Guides
CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Switch/Security/HTTPS page.
Command
ip http secure-server
ip http secure-port
port_number
copy tftp https-certificate
E x a m p l e
Console(config)#ip http secure-server
Console(config)#ip http secure-port 441
Console(config)#
Port Security
Port security is a feature that allows you to configure a switch port with one
or more device Media Access Control (MAC) addresses that are authorized
to access the network through that port.
When port security is enabled on a port, the switch stops learning new
MAC addresses on the specified port. Only incoming traffic with source
addresses already stored in the dynamic or static address table are accepted
as authorized to access the network through that port. If a device with an
unauthorized MAC address attempts to use the switch port, the intrusion is
detected and the switch can automatically take action by disabling the port
and sending a trap message.
To use port security, first allow the switch to dynamically learn the <source
MAC address, VLAN> pair for frames received on a port for an initial
period, and then enable port security to stop address learning. Be sure you
enable the learning function long enough to ensure that all valid VLAN
members are registered on the selected port.
Usage
Enables the HTTPS server on the switch.
The no form command disables the HTTPS server.
Specifies the TCP port number used for HTTPS
connection to the switch's Web interface.
The no form command restores the default port.
Copies an HTTPS certificate from an TFTP server
to the switch.