Dell PowerConnect 3248 Podręcznik - Strona 18
Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Dell PowerConnect 3248. Dell PowerConnect 3248 42 stron. Powerconnect 3248; powerconnect 5224
Również dla Dell PowerConnect 3248: Lista funkcji (2 strony), Specyfikacja (2 strony)
Drukuj stronę
18
Addendum to the 32 48 and 5 224 User 's Guides
CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Switch/Security/HTTPS page.
Command
ip http secure-server
ip http secure-port
port_number
copy tftp https-certificate
E x a m p l e
Console(config)#ip http secure-server
Console(config)#ip http secure-port 441
Console(config)#
Port Security
Port security is a feature that allows you to configure a switch port with one
or more device Media Access Control (MAC) addresses that are authorized
to access the network through that port.
When port security is enabled on a port, the switch stops learning new
MAC addresses on the specified port. Only incoming traffic with source
addresses already stored in the dynamic or static address table are accepted
as authorized to access the network through that port. If a device with an
unauthorized MAC address attempts to use the switch port, the intrusion is
detected and the switch can automatically take action by disabling the port
and sending a trap message.
To use port security, first allow the switch to dynamically learn the <source
MAC address, VLAN> pair for frames received on a port for an initial
period, and then enable port security to stop address learning. Be sure you
enable the learning function long enough to ensure that all valid VLAN
members are registered on the selected port.
Usage
Enables the HTTPS server on the switch.
The no form command disables the HTTPS server.
Specifies the TCP port number used for HTTPS
connection to the switch's Web interface.
The no form command restores the default port.
Copies an HTTPS certificate from an TFTP server
to the switch.