Dell PowerConnect 8024 릴리스 정보 - 페이지 14
{카테고리_이름} Dell PowerConnect 8024에 대한 릴리스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 8024 20 페이지. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Dell PowerConnect 8024에 대해서도 마찬가지입니다: 릴리스 정보 (27 페이지), 구성 매뉴얼 (21 페이지), 펌웨어 업그레이드 (24 페이지)
페이지 인쇄
PowerConnect 8024/8024F Release Notes
Known Restrictions and Limitations
Interfaces
Ports
Description
10GBaseT ports operating at speeds
lower than 10G must have both Flow
Control and Priority Flow Control
enabled in hardware. As a result, when
showing the interface status, Flow
Control will show active on interfaces
enabled for Priority Flow Control.
When using Priority Flow Control, the
dot1p-mapping to traffic class must be
one-to-one. For example, dot1p value 0
must be mapped to traffic class 0, and
dot1p value 1 must be mapped to traffic
class 1.
Page 12
User Impact
This is automatically enabled when the user enables Priority Flow
Control.
If this is not done, the wrong queue may be suspended when priority
flow control frames are received.
System Firmware Version 3.1.4.16