Dell PowerEdge 6400 조립 및 설치 - 페이지 7

{카테고리_이름} Dell PowerEdge 6400에 대한 조립 및 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 6400 32 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 6400에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 업그레이드 설치 매뉴얼 (42 페이지), 랙 설치 (34 페이지), 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (37 페이지), 매뉴얼 (10 페이지), 설치 (4 페이지), 매뉴얼 (10 페이지), 매뉴얼 (15 페이지)

페이지 인쇄
Dell PowerEdge 6400 조립 및 설치
support.dell.com
NOTE: If you cannot locate an unused connector on the DC power harness, discon-
nect the power cable from a peripheral device close to the fan assembly. Next,
connect the power cable to the fan assembly, and connect the remaining fan assem-
bly power connector to the peripheral device.
expansion-card
bracket
9.
If you disconnected any interface cables between expansion card(s) and the SCSI
backplane board, connect the interface cables to the SCSI backplane board.
NOTE: Route interface cables from the expansion card(s) to the side of the
expansion-card cooling fan assembly (see Figure 1-2).
10. Examine all cable connections, especially those that might have come loose dur-
ing your work. Fold cables out of the way so that they do not catch on the system
cover.
11. Replace the system cover.
12. Reconnect the system and devices to their electrical outlets, and turn them on.
fan assembly
bracket
fan assembly
DC power connectors (2)
SCSI cable(s)
Installation Information
bracket
thumbscrew
cooling
fan assembly
1-3