Entec LBS-751 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Entec LBS-751에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Entec LBS-751 12 페이지. Electronic sectionalizer control

Quick Start Guide

LBS-751 Control

Port Settings

1. Open RDB with acSELerator and select OEM file saved previously in Step 4. Save-As

OEM Comm Config (e.g. Customer Field Device OEM Comm Config).

2. Use setting editor to open Port config. Make changes, save and upload new Port

settings to 751.

Quick Tip

Make sure to enable a session in either Modbus or DNP protocol when using Port 1

(Ethernet), scroll down to the bottom of Port 1 page.

APPENDIX 2

Scada Setup

APPENDIX 2