Dell S6000-ON 시작하기 매뉴얼 - 페이지 11

{카테고리_이름} Dell S6000-ON에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S6000-ON 26 페이지. Open networking
Dell S6000-ON에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (29 페이지), 설치 매뉴얼 (41 페이지)

페이지 인쇄

CAUTION: To prevent electrical shock, ensure the S6000-ON is grounded

properly. If you ground your equipment incorrectly, excessive emissions may

result. To ensure the power cables meet your local electrical requirements, use

a qualified electrician.

The power supply LED (on the I/O panel) indicates the power supply status:

•

Off - no power

•

Solid green - Power supply present and working

For additional LED information, refer to your third-party operating software

documentation.

Fans

The S6000-ON supports three hot-swappable fans that provide cooling for the

system. The S6000-ON has stock keeping units (SKUs) that support the

following configurations. Installation of the fans is done as part of the factory

install based on SKU type. The PSUs are installed at the customer site (refer to

Power

Supplies).

•

AC PSU with fan airflow from I/O to PSU

•

AC PSU with fan airflow from PSU to I/O

All fans and PSUs in a configuration must be in the same airflow direction.

The S6000-ON supports three fan trays with airflow directions from I/O to

Utility or Utility to I/O. The PSU airflow directions are indicated with stickers

on PSUs.

After Installing the S6000-ON

After you have securely installed and powered on the S6000-ON, to configure

your system, refer to your ONIE-compatible third-party operating system

documentation.

System Status

You can view S6000-ON status information using the system LEDs.

Hardware Overview