Dell S6000-ON Podręcznik dla początkujących - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Przełącznik Dell S6000-ON. Dell S6000-ON 26 stron. Open networking
Również dla Dell S6000-ON: Instrukcja rozwiązywania problemów (29 strony), Instrukcja instalacji (41 strony)
Drukuj stronę
CAUTION: To prevent electrical shock, ensure the S6000-ON is grounded
properly. If you ground your equipment incorrectly, excessive emissions may
result. To ensure the power cables meet your local electrical requirements, use
a qualified electrician.
The power supply LED (on the I/O panel) indicates the power supply status:
•
Off - no power
•
Solid green - Power supply present and working
For additional LED information, refer to your third-party operating software
documentation.
Fans
The S6000-ON supports three hot-swappable fans that provide cooling for the
system. The S6000-ON has stock keeping units (SKUs) that support the
following configurations. Installation of the fans is done as part of the factory
install based on SKU type. The PSUs are installed at the customer site (refer to
Power
Supplies).
•
AC PSU with fan airflow from I/O to PSU
•
AC PSU with fan airflow from PSU to I/O
All fans and PSUs in a configuration must be in the same airflow direction.
The S6000-ON supports three fan trays with airflow directions from I/O to
Utility or Utility to I/O. The PSU airflow directions are indicated with stickers
on PSUs.
After Installing the S6000-ON
After you have securely installed and powered on the S6000-ON, to configure
your system, refer to your ONIE-compatible third-party operating system
documentation.
System Status
You can view S6000-ON status information using the system LEDs.
8
Hardware Overview