Dell 5530 Mono Laser 서비스 매뉴얼 - 페이지 27
{카테고리_이름} Dell 5530 Mono Laser에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5530 Mono Laser 46 페이지. Loading paper and specialty media
Dell 5530 Mono Laser에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 설정 및 사양 매뉴얼 (29 페이지), 설정 및 사양 (29 페이지)
페이지 인쇄
Installing the Fans
1
Perform the following steps to install the system fan:
a
Align the screw holes on the left fan with the screw holes on the palm-rest assembly.
b Connect the left fan cable to the system board.
c
Route the display cable through the routing guides on the left fan.
d Replace the M2x4 (2) screws that secure the left fan to the system board.
e
Align the right fan to the system board.
f
Route the touch-screen cable through the routing guides on the right fan.
g Connect the touch-screen cable to the system board.
h Connect the fan cable to the connector to the system board.
i
Replace the Mylar tape that secures the cable to the system board
j
Align the metal brackets that secure touch-screen cable and DisplayPort Over Type-C cable.
k
Replace the M2x4 (2) screws that secure the metal brackets and right fan to the system board.
a
Install the
Base cover
2
Follow the procedures in
After Working Inside Your
Computer.
Disassembly and reassembly
27