Dell 5530 Mono Laser 서비스 매뉴얼 - 페이지 28
{카테고리_이름} Dell 5530 Mono Laser에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5530 Mono Laser 46 페이지. Loading paper and specialty media
Dell 5530 Mono Laser에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 설정 및 사양 매뉴얼 (29 페이지), 설정 및 사양 (29 페이지)
페이지 인쇄
Power connector port
Removing the DC-in Connector
1
Follow the procedures in
2
Remove the:
a
base cover
b
battery
3
Perform the following steps to remove the I/O board:
a
Disconnect the DC-in cable from the connector to the system board [1].
b Remove the M2x3 screw that secures the DC-in connector to the computer [2].
c
Lift the DC-in connector from the computer [3].
Installing the DC-in Adapter Port
1
Place the DC-in adapter port into the slot on the palm-rest assembly.
2
Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3
Replace the M2x3 screw that secures the power-adapter port to the palm-rest assembly.
4
Connect the power-adapter port cable to the system board.
5
Install the:
a
Battery
b
Base cover
6
Follow the procedures in
Audio board
Removing Audio board
1
Follow the procedures in
2
Remove the:
28
Disassembly and reassembly
Before Working Inside Your
After Working Inside Your
Computer.
Before Working Inside Your
Computer.
Computer.