Dell 5530 Mono Laser Servis Kılavuzu - Sayfa 28
Yazıcı Dell 5530 Mono Laser için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell 5530 Mono Laser 46 sayfaları. Loading paper and specialty media
Ayrıca Dell 5530 Mono Laser için: Hızlı Referans Kılavuzu (2 sayfalar), Kurulum ve Teknik Özellikler Kılavuzu (29 sayfalar), Kurulum ve Özellikler (29 sayfalar)
Sayfayı Yazdır
Power connector port
Removing the DC-in Connector
1
Follow the procedures in
2
Remove the:
a
base cover
b
battery
3
Perform the following steps to remove the I/O board:
a
Disconnect the DC-in cable from the connector to the system board [1].
b Remove the M2x3 screw that secures the DC-in connector to the computer [2].
c
Lift the DC-in connector from the computer [3].
Installing the DC-in Adapter Port
1
Place the DC-in adapter port into the slot on the palm-rest assembly.
2
Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3
Replace the M2x3 screw that secures the power-adapter port to the palm-rest assembly.
4
Connect the power-adapter port cable to the system board.
5
Install the:
a
Battery
b
Base cover
6
Follow the procedures in
Audio board
Removing Audio board
1
Follow the procedures in
2
Remove the:
28
Disassembly and reassembly
Before Working Inside Your
After Working Inside Your
Computer.
Before Working Inside Your
Computer.
Computer.