AVYCON AVR-HT832A-40T 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} AVYCON AVR-HT832A-40T에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVYCON AVR-HT832A-40T 2 페이지. Hybrid dvr

페이지 인쇄

⑤ Check each camera you want to add and then click "Add" button. The DVR

will automatically add the camera(s) selected and return to "Edit Camera"

interface. "Online" status means the device connected successfully and you

will see the live image. You may select the added device and click

modify channel, IP address, etc.

Camera Signal

Edit Camera

IP Planning

No.

Camera Name

Address

Port

Status

Protocol

Model

IP Camera 1

192.168.1.45

Online

XXX

[A01]Camera1

[A02]Camera2

[A03]Camera3

[A04]Camera4

Edit Camera

Camera Name

IP Camera 1

Address

192 .168 . 1 . 58

Port

Protocol

XXX

Model

XXX

Username

admin

Password

Test

WAN

If your DVR has been connected correctly to your local network and you can conﬁrm

access to the internet, you can also add remote WAN IP cameras. To add a camera,

either click on the

button on a blank channel or navigate to Start>Settings>

Camera and click on "Add Camera". Choose "Manually Add". Enter the WAN IP

address, server port, username and password of the remote IP camera. You can test

the connection by clicking on the "Test" button and if camera tests successfully you

can add that camera.

9. UPnP

You can take advantage of your router's UPnP function, which can automatically

conﬁgure port forwarding.

① Navigate to Start>Settings>Network>UPnP, and enable UPnP and then click

"Apply" button to save.

② Conﬁrm that the UPnP function is enabled in your router.

③ Click "Refresh" button to refresh the UPnP status. If the UPnP status displays

"Invalid UPnP" after refreshing it for several times, their may be a port conﬂict.

Please change the mapping type to "Manual" and then click

until the UPnP status changes to "valid UPnP"

UPnP

Enable

button to

Map Type

Port Type

HTTP Port

HTTPS Port

Server Port

Search Camera

RTSP Port

Preview

Edit

Upgrade

Version

4.1.0.0

10. NAT

NAT Settings

① Conﬁrm that DVR is powered and connected to the Internet.

② Navigate to Start>Settings>Network>TCP/IP. Conﬁrm your IP

Sync to IPC

address settings (Automatic or Manual)

③ Set the preferred or alternative DNS Server. Click "Apply" to save

the parameters. Default values are 8.8.8.8 and 4.2.2.2

④ Next, navigate to Start>Settings>Network>NAT tab. Enable NAT

and then click apply. Wait up to one minute before testing remote

connection using the QR code.

Cancel

Visit Address

Enable

NAT Server Address

NAT Access

After ﬁnishing conﬁguring the NAT settings, you can enter

www.autonat.com in the address bar of your browser. If this is the ﬁrst

time visiting the site, you may have to install some ActiveX plugins.

After successfully installing ActiveX, you should see the login screen

and you should be able to enter in your credentials.

to edit the port

Auto

External Port

External Address

Port

UPnP Status

Edit

183.17.254.19

Valid UPnP

443

183.17.254.19

443

Valid UPnP

6036

183.17.254.19

6036

Valid UPnP

554

183.17.254.19

554

Invalid UPnP

Refresh

Apply

www.autonat.com

nat.autonat.com

Apply

Enter device serial number

Enter Username

Enter Password

QR Code: Click

on the menu bar at the bottom of the live interface to

check the QR code or go to Start>Settings>Network>Network Status to check

the QR code (12 digits) of the DVR.

Username: The username of the DVR. The default username is admin.

Password: The password of the DVR. The password is set by yourself when you

conﬁgure the wizard for the ﬁrst time.

11. Manual Recording

Before recording, conﬁrm that a HDD has been installed and formatted. From the live

interface you can access the menu toolbar. Click

to stop recording. You can also click

to check the status of the recording.

12. Playback

Instant Playback

Click "Instant Playback" from the right-click menu of any camera's preview window to

select the amount of time you want to preview. When playback starts you can also click on

the progress bar to change times.

General Playback

Click

on the tool bar at the bottom of the live preview interface or click Start>Playback

to enter the playback interface as shown below. The system will load up the current

cameras viewed or you can manually select which cameras you want to view. Click

playback window to bring up the "Add Camera" window. Select the cameras you want to

view playback on and then click "Add" to add camera.

button to start recording. Click it again

in the