EarthQuake Cinenova 7300 사용자 설명서 - 페이지 5

{카테고리_이름} EarthQuake Cinenova 7300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthQuake Cinenova 7300 12 페이지. 7 channel, class ab amplifier

Cinénova 7300 Front Panel Overview

1. Master Power Switch:

Turns the current to the amplifier ON or OFF manually. When turning

on the amplifier via a 12VDC source the switch must be in the OFF

position.

Additionally when adding or removing 12VDC connections or any

other connections the main power circuit breaker needs to be in the

off position. This will help prevent any surges that could damage your

products or cause bodily injury.

www.earthquakesound.com

Peak LED Indicators:

The Cinénova 7300 is equipped with seven LED indicators on the

front panel that should remain unlit. These LEDs indicate the oper-

ating status of each corresponding channel. If an LED or all LEDs

remain lit continuously, the amplifier is clipping that channel and the

volume should be turned down immediately to prevent damage. It is

ok for the LED to flicker but it should never remain on continuously.