AW-Lake EDG1 설치 운영 및 유지보수 매뉴얼 - 페이지 11

{카테고리_이름} AW-Lake EDG1에 대한 설치 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AW-Lake EDG1 18 페이지. The edge flow sensor with bluetooth

*A USB-C cable is required to connect to the device. This cable powers the unit and

no extra power supply is needed for Communication.

First thing that must be done is to download the toolkit from the AW-Lake website which can

be found at this link.

( https://aw-lake.com/downloads/software/)

Once downloaded, double

click the icon to open the application. (Figure 8.) Unscrew the lid of the sensor to gain access to

the USB-C connector on the sensor. Plug cable into the EDGE unit and a USB port on the

computer. Select COM Port device is on. If the device's COM port does not appear click the

Refresh button. Next click Auto-Detect Device on COM Port to bring up the toolkit.

Toolkit Overview

Figure 9: Toolkit

The AW-Lake Toolkit is designed to help users

access all aspects of the EDGE sensor. From

selecting output modes, scaling analog outputs,

setting up a linearizer, and viewing real time

flow data. Depending on the version of sensor

the toolkit may look different. The toolkit reads

the version of the sensor and brings up all

available options. (Figure 9)

In the top right corner of the toolkit is a status

bar to show communication status of the unit.

There are 4 different messages it will display.

OK - Indicates device is working properly

Unsaved - Indicates a field has been modified but changes have not been saved

Error - Indicates the toolkit is not communicating with the device

Disconnected - Appears when you manually disconnect from the device

11 |

P a g e