EarthQuake E43 earth auger powerhead 운영자 매뉴얼 - 페이지 5

{카테고리_이름} EarthQuake E43 earth auger powerhead에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthQuake E43 earth auger powerhead 16 페이지. Power earth auger
EarthQuake E43 earth auger powerhead에 대해서도 마찬가지입니다: 운영자 매뉴얼 (17 페이지)

페이지 인쇄

EarthQuake E43 earth auger powerhead 운영자 매뉴얼

Burns and Fires

The muffler, muffler guard and other parts of the engine

become extremely hot during the operation of the engine.

These parts remain extremely hot after the engine has

stopped.

Prevention of Burns and Fires

• Never remove the muffler guard from the engine.

• Never touch the muffler guard because it is extremely

hot and will cause severe burns.

• Never touch parts of the engine that become hot after

operation.

• Always keep materials and debris away from muffler

guard and other hot parts of the engine to avoid fires.

Steps for W

orking on Engine or Attachment

Steps for W

Steps for Working on Engine or Attachment

orking on Engine or Attachment

Do Not Alter/Modify Engine or Attachments:

Avoid injury! Never alter or modify the engine from

the factory. Serious injury or death may occur if

engine is modified or altered.

Avoid injury! When working on or replacing parts for

the engine or attachments you must always

disconnect spark plug wire from the spark plug and

keep it away from the spark plug.

1. Turn off engine switch.

2. Disconnect the spark plug wire from the spark plug.

3. Securely place the disconnected spark plug wire away

from the spark plug and any metal parts. This must always

be done or arcing may occur between spark plug wire and

metal parts.

4. Replace or repair the part on the engine or attachment.

5. Check all parts that were repaired, or removed during

repair, that they are secure and fit correctly.

NOTE: All repair parts must come from the factory.

Never replace parts that are not specifically designed

for the engine or attachment.

6. Replace spark plug wire.

1-800-345-6007

SAFETY

CAUTION

Avoid injury! Always wear hearing protection while

operating engine.

Avoid injury! Please do not start your auger until you

have read the previous section of this manual. If you

have read these, follow the steps below to start your

auger.

P P P P P reparing Engine for Starting

reparing Engine for Starting

GAS AND OIL

Quality

To operate the engine you must use a high quality 2-cycle

oil to ensure that the engine operates correctly during the

break-in period and the life of the engine. Use unleaded

regular or unleaded premium gas only.

Mixture

Run earth auger with a 20:1 ratio for the first 20 hours of

operation. After 20 hours of use, mix at a ratio of 25:1. See

charts 1 & 2.

CHART 1

l l a

n o

a g

o l l

s n

2 1

a g

o l l

s n

0 3

CHART 2

l l a

n o

a g

o l l

s n

0 1

a g

o l l

s n

6 2

Page 5

CAUTION

L I

I T

u o

c n

s e

0 2

1 :

u o

c n

s e

0 2

1 :

u o

c n

s e

0 2

1 :

L I

I T

u o

c n

s e

5 2

1 :

u o

c n

s e

5 2

1 :

u o

c n

s e

5 2

1 :