EarthQuake E43 earth auger powerhead 운영자 매뉴얼 - 페이지 9

{카테고리_이름} EarthQuake E43 earth auger powerhead에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthQuake E43 earth auger powerhead 16 페이지. Power earth auger
EarthQuake E43 earth auger powerhead에 대해서도 마찬가지입니다: 운영자 매뉴얼 (17 페이지)

페이지 인쇄

EarthQuake E43 earth auger powerhead 운영자 매뉴얼

T T T T T ransporting Y

ransporting Y

ransporting Your Earth Auger

ransporting Y

our Earth Auger

ransporting Y

our Earth Auger

1. Never transport engine inside an enclosed space or

vehicle. Fuel or fuel vapors may ignite causing serious

injury or death.

2. If fuel is present in the fuel tank, transport in an open

vehicle in an upright position.

3. If an enclosed vehicle must be used, remove gas into

an approved red gasoline container. DO NOT siphon by

mouth.

4. Run engine to use up the fuel in the carburetor and

fuel tank. Always run engine in a well ventilated area.

5. Wipe away any spilled fuel from engine and earth

auger. Allow to dry.

1-800-345-6007

MAINTENANCE AND STORAGE

MAINTENANCE AND ST

ORAGE

Long T

Long Term Storage

erm Storage

• If your earth auger will not be used for more than one

month, prepare it for long term storage.

Steps for Long Term Storage

1. Add fuel stabilizer according to manufacturer's

instructions.

2. Run engine for 10-15 minutes to ensure that the

stabilizer reaches the carburetor.

3. Remove the remainder of the fuel from the gas tank into

an approved fuel container.

Avoid injury! To avoid injury or death, never siphon

fuel by mouth.

Avoid injury! Never store earth auger with fuel in the

fuel tank inside an enclosed area or building.

4. Remove auger from powerhead and apply a thin layer of

grease to the output shaft (8913).

5. Store auger and powerhead (engine) in a vertical position.

6. Remove all debris from auger and powerhead (engine).

Page 9

CAUTION