EarthWay 2600A-Plus 조립 지침 매뉴얼 - 페이지 2

{카테고리_이름} EarthWay 2600A-Plus에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthWay 2600A-Plus 6 페이지. 40 lb broadcast spreader
EarthWay 2600A-Plus에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지)

페이지 인쇄

Assembly and Operation Instructions

ASSEMBLY INSTRUCTIONS

Remove and identify all loose parts from carton

2. Position hopper as shown to the right. Install frame using (4) #10 x 1 ¼" Flat Head Phillips screws. TIGHTEN

THESE NOW

Install gear box by inserting the pinion shaft into hole in center of hoppers

bottom. The ARROW on the gearbox must point to FRONT of the hopper.

Follow label instructions on hopper.

Install lower handles onto Frame and secure with ¼-20 x 2¼" bolt through

hole in Frame Braces and through the hole in frame

Remove agitator when using Rock Salt to prevent gearbox

Next, SLIDE THE AXLE (COAST WHEEL SIDE FIRST) through the right

side lower handle and into the gearbox (with the arrow facing the

FRONT), you will need to rotate the axle to engage with the gearbox,

then through the left side lower handle.

EarthWay 2600A-Plus_12-3

Warning

damage

PAGE 2