EarthWay 2600A-Plus Montageanleitung Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Streuwagen EarthWay 2600A-Plus herunter. EarthWay 2600A-Plus 6 Seiten. 40 lb broadcast spreader
Auch für EarthWay 2600A-Plus: Montageanleitung Handbuch (6 seiten)
Seite drucken
Assembly and Operation Instructions
ASSEMBLY INSTRUCTIONS
1.
Remove and identify all loose parts from carton
2. Position hopper as shown to the right. Install frame using (4) #10 x 1 ¼" Flat Head Phillips screws. TIGHTEN
THESE NOW
3.
Install gear box by inserting the pinion shaft into hole in center of hoppers
bottom. The ARROW on the gearbox must point to FRONT of the hopper.
Follow label instructions on hopper.
Install lower handles onto Frame and secure with ¼-20 x 2¼" bolt through
4.
hole in Frame Braces and through the hole in frame
Remove agitator when using Rock Salt to prevent gearbox
Next, SLIDE THE AXLE (COAST WHEEL SIDE FIRST) through the right
side lower handle and into the gearbox (with the arrow facing the
FRONT), you will need to rotate the axle to engage with the gearbox,
then through the left side lower handle.
EarthWay 2600A-Plus_12-3
Warning
damage
PAGE 2