EarthWise TC70001 운영자 매뉴얼 - 페이지 6

{카테고리_이름} EarthWise TC70001에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthWise TC70001 12 페이지. Tiller/cultivator
EarthWise TC70001에 대해서도 마찬가지입니다: 운영자 매뉴얼 (9 페이지)

페이지 인쇄

This product must be assembled correctly before use.

1. Remove the screws (M5 X 12) and washers from

wheel frame. Insert the wheels on the axle of wheel

frame, then attach washers and screws (M5 X 12)

to secure. (Fig. 2-1)

2. Press the wheel covers into the wheel and cover the

ends of the axles. You may use a hammer to seat

them securely into the wheels. (Fig. 2-1)

3. To lower wheel frame, push the lock button on back

of motor housing to release the frame (Step A). Low-

er the wheel frame (Step B) and pull out the lock pin

on lower handle section (Step C). Align lock pin to

the hole in wheel frame then release it to lock the

wheel frame in position. (Fig. 2-2)

4. Slide the cord retainer (5) onto the center handle

section (4). (Fig. 2-3)

5. Attach the center handle section (4) to the lower

handle sections (9) using the two supplied M6 X 45

bolts (6) and wing nuts (7). (Fig. 2-4)

6. Fasten the upper handle section (1) to the center

handle section (4) using the two supplied M6 X 45

bolts (6) and wing nuts (7) (Fig. 2-5).

ASSEMBLY

5

M5 X 12

7. Install the switch and power cable assembly onto the

upper handle section using the two supplied bolts

(ST3.9 x 19). (Fig. 2-6)

8. Use the two supplied cable clips (3) to secure the

cord. (Fig. 2-7)

WARNING: If any parts are damaged or missing do

not operate this product until the parts are replaced.

Failure to heed this warning could result in serious

personal injury. Call our customer service help line at

-800-313-5111 for assistance

WARNING: Do not attempt to modify this product or

create accessories not recommended for use with

this product. Any such alteration or modification is misuse

and could result in a hazardous condition leading to

possible serious personal injury.

WARNING: Do not connect to power supply until

assembly is complete. Failure to comply could

result in accidental starting and possible serious

personal injury.

ST3.9 X 19

M6 X 45