ALLIGATOR sens.it RetroFIT-kit 2.0 운영 매뉴얼 - 페이지 11

{카테고리_이름} ALLIGATOR sens.it RetroFIT-kit 2.0에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLIGATOR sens.it RetroFIT-kit 2.0 18 페이지. Pressure monitoring system

페이지 인쇄

1.8 Switching off the display

1) Switching off manually:

- Press and hold button Bt2 for 3

seconds to switch off the display

1.9 Switching between pressure and temperature

- To switch between pressure and temperature display, briefly press button Bt2

- The display automatically switches back to the pressure display after approx. 10

seconds (temperature and pressure are displayed for each wheel position)

1.10 Display in alarm status

1.10.1 Air pressure undercut (threshold value)

\ | /

/ | \

If the receiver recognises lower pressure values than the adjusted threshold values

(see Table Step 3), the alarm diode blinks for approx. 10 seconds.

The current pressure blinks alternatingly with an exclamation mark (!) at the

relevant position for as long as the threshold value is undercut.

Bt2

2) Switching off automatically:

- The display switches off

automatically after 8 minutes if no

wheel movements are detected

during this time

\ | /

/ | \