ALLIGATOR sens.it RetroFIT-kit 2.0 Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильные аксессуары ALLIGATOR sens.it RetroFIT-kit 2.0. ALLIGATOR sens.it RetroFIT-kit 2.0 18 страниц. Pressure monitoring system
1.8 Switching off the display
1) Switching off manually:
- Press and hold button Bt2 for 3
seconds to switch off the display
1.9 Switching between pressure and temperature
- To switch between pressure and temperature display, briefly press button Bt2
- The display automatically switches back to the pressure display after approx. 10
seconds (temperature and pressure are displayed for each wheel position)
1.10 Display in alarm status
1.10.1 Air pressure undercut (threshold value)
\ | /
-
/ | \
If the receiver recognises lower pressure values than the adjusted threshold values
(see Table Step 3), the alarm diode blinks for approx. 10 seconds.
The current pressure blinks alternatingly with an exclamation mark (!) at the
relevant position for as long as the threshold value is undercut.
-
Bt2
2) Switching off automatically:
- The display switches off
automatically after 8 minutes if no
wheel movements are detected
during this time
\ | /
-
/ | \
-
11