ALLIMEX SolarSpeed 설치 지침 - 페이지 6

{카테고리_이름} ALLIMEX SolarSpeed에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLIMEX SolarSpeed 15 페이지. East-west facing landscape

INSTALLATION

3. ALIGN THE ROWS

SolarSpeed alignment tool

Align the rows according to the plan, considering the length of the panels.

Secure the length on the alignment

tool of the panel used.

Dilatation (thermal interruptions)

In order to compensate for the thermal expansion of the SolarSpeed mounting frame, a new group

of panels must be started every 26 metres in the E-W direction. The distance between these 2 groups

of panels should be at least 300 mm, to ensure the use of ballast holders.

In the N-S direction, dilatation is ensured by sliding the rebate only 75% of the way into the rail of the

previous base unit every 30 metres, but not securing it with screws. This means that the rows are

still connected to each other (which benefits the required ballast) and there is also room for thermal

expansion.

Tip! Use a chalk line to set a horizontal and vertical mar-

king on the roof. When setting the markings, respect

the minimal edge zones (see general remarks).

Tip! To easily determine and keep the distance

between the base units, use and alignment tool.

Turn the alignment tool 180° and align

the rows.

Chalk line