ALLIMEX SolarSpeed 설치 지침 - 페이지 4
{카테고리_이름} ALLIMEX SolarSpeed에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLIMEX SolarSpeed 15 페이지. East-west facing landscape
페이지 인쇄INSTALLATION
1. MOUNTING BASE UNITS
From semi-mounted to mounted base units
SolarSpeed base-unit
semi-mounted
Assembling base units
•
Place the base units on a flat en stable roof surface.
•
Connect the base units by sliding the top of the rail of the first base unit into the connection piece
at the back of the next base unit.
•
Fix by drilling 2 self-tapping screws (Ø6.5) or SS rivets into the pre-drilled holes on the side or on
top of the connection pieces.
•
First, attach the connector with rubber protection onto the base units at the end of each row,
before attaching the base units to each other.
Secure the loose part of the mounting bracket to the rail by means
of plate screws (Ø6.5). When using concrete of PP bases, these
must be secured with poprivets.
Fold the panel stop using a screwdriver. Fold it further until it forms
an angle of 90 ° to the mounting bracket.
Plate screws
3