ALLIMEX SolarSpeed Mounting Instructions - Page 4
Browse online or download pdf Mounting Instructions for Solar panel ALLIMEX SolarSpeed. ALLIMEX SolarSpeed 15 pages. East-west facing landscape
INSTALLATION
1. MOUNTING BASE UNITS
From semi-mounted to mounted base units
SolarSpeed base-unit
semi-mounted
Assembling base units
•
Place the base units on a flat en stable roof surface.
•
Connect the base units by sliding the top of the rail of the first base unit into the connection piece
at the back of the next base unit.
•
Fix by drilling 2 self-tapping screws (Ø6.5) or SS rivets into the pre-drilled holes on the side or on
top of the connection pieces.
•
First, attach the connector with rubber protection onto the base units at the end of each row,
before attaching the base units to each other.
Secure the loose part of the mounting bracket to the rail by means
of plate screws (Ø6.5). When using concrete of PP bases, these
must be secured with poprivets.
Fold the panel stop using a screwdriver. Fold it further until it forms
an angle of 90 ° to the mounting bracket.
Plate screws
3