ALLIMEX SolarSpeed Instrucciones de montaje - Página 4

Navegue en línea o descargue pdf Instrucciones de montaje para Panel solar ALLIMEX SolarSpeed. ALLIMEX SolarSpeed 15 páginas. East-west facing landscape

Imprimir página

INSTALLATION

1. MOUNTING BASE UNITS

From semi-mounted to mounted base units

SolarSpeed base-unit

semi-mounted

Assembling base units

•

Place the base units on a flat en stable roof surface.

•

Connect the base units by sliding the top of the rail of the first base unit into the connection piece

at the back of the next base unit.

•

Fix by drilling 2 self-tapping screws (Ø6.5) or SS rivets into the pre-drilled holes on the side or on

top of the connection pieces.

•

First, attach the connector with rubber protection onto the base units at the end of each row,

before attaching the base units to each other.

Secure the loose part of the mounting bracket to the rail by means

of plate screws (Ø6.5). When using concrete of PP bases, these

must be secured with poprivets.

Fold the panel stop using a screwdriver. Fold it further until it forms

an angle of 90 ° to the mounting bracket.

Plate screws