Miele PW 6101 프로그래밍 지침 매뉴얼 - 페이지 17
{카테고리_이름} Miele PW 6101에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6101 48 페이지. Profitronic m innovation m
Miele PW 6101에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)
페이지 인쇄
Material number
Turn the rotary dial to access the material
number input field. The material number
cannot be changed! When a new
programme is created in supervisor level
xxxxxxxxx will appear in this position.
Area 1 - 2 - 3
Turn the rotoary dial clockwise to access the
input field for area 1.
Create ~ Programme header
Area 1: No
Name Area 1: Pre-wash
-
e
Selection choice: - No
- 1 Block up to 10 Blocks
If a number of blocks are specified then an
area name needs to be given. This can be
done under "Name Area 1". The first
suggestion will appear here for Area 1
"Pre-wash",
for Area 2 "Main wash" and
for Area 3 "Rinses".
See also "Programme structure".
Create ~ Programme header
Area 1: 1 Block
Name Area 1: Pre-wash
-
e
The selection and input of Name Area 1 is
the same procedure as for a programme
name.
The procedure for Areas 2 and 3 is the same
as for Area 1.
M.-Nr. 06 533 430
Weigh
By selecting and confirming this option with
the rotary dial you can specifiy how laundry
is to be weighed.
Create ~ Programme header
Weigh: No
Nominal load: 10.0 kg
Selection choice:
– No
The controls assume that a nominal load is
-
always present. You cannot enter the weight
e
manually before starting a programme.
S
A
– manual
Laundry can be weighed by hand before
starting a programme.
– automatic
The machine automatically weighs how
much laundry is in the drum.
Nominal load
By selecting a nominal load you can allocate
a specific laundry weight to the programme.
-
The max. value will depend on the machine.
e
Create ~ Programme header
S
A
Nominal load: 10.0 kg
Minimum water level: 100 mm
Selection choice:
Programming
-
e
-
e
- 0.0 kg, 0.2 kg to 32 kg
-
e
S
A
-
e
S
A
17