Miele PW 6101 프로그래밍 지침 매뉴얼 - 페이지 18

{카테고리_이름} Miele PW 6101에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6101 48 페이지. Profitronic m innovation m
Miele PW 6101에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)

페이지 인쇄

Programming

Minimum water level:

By selecting the minimum water option all

blocks without heating will be run using the

minimum level. This value specifies the

lowest level selectable.

The max. value is 350 mm.

Create ~ Programme header

Minimum water level: 100 mm

Fill type: Auto load adjustment

Selection choice: - 0 mm, 2 mm to 350 mm

Fill type

This option is used to specify how water is

taken into the machine.

If when creating a programme the fill type is

changed in the programme header, the

basic settings for the level will be saved to

the blocks again.

Create ~ Programme header

Fill type: Auto load adjustment

Access control: Yes

Selection choice:

– Auto load adjustment mm

In programmes which use auto load

adjustment the amount of laundry in the

drum influences the water level, the amount

of detergent required and the number of

rinses.

– Water level mm

When selecting - Water level mm or - Auto

load adjustment the option of selecting

"Concentration ml/l" is blocked in the

dispensing menu and in the dispensing type

menu in block programming.

– Water volume l

– Laundry to suds ratio kg/l

Access control

When access control is selected the

programme is available for use. Only

progammes that have been given "Access

control" can be started.

Create ~ Programme header

Access control: Yes

Lock: No

Selection choice: - No - Yes

Lock

When the lock option is selected the

programme is barred from use. A

programme once started can only be

stopped or cancelled by pressing the

Stop/End button within the first minute of

starting it. The door cannot be opened until

the programme has finished.

Create ~ Programme header

Lock: Yes

Peak load: Yes

Selection choice: - No - Yes

M.-Nr. 06 533 430