Miele PW 811 설치 계획 - 페이지 13

{카테고리_이름} Miele PW 811에 대한 설치 계획을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 811 38 페이지.

Hot water

connection

PW 811 / PW 814 / PW 818

To minimise energy consumption during operation with hot water,

the washing machine should be connected to a hot water ring

circuit.

So-called "transmission pipes" (single pipes to hot water generators)

can result in cooling down of the water remaining in the pipes if not

in constant use. More energy would then be consumed to heat the

suds up again.

Use the inlet hose supplied (hot - red stripes) for the hot water

connection.

The temperature of the water intake must not exceed 70 °C.

If there is no hot water supply at the installation location for the

washing machine, the connection hose must nevertheless be

connected to the cold water supply. A Y-piece is required in this case.

The cold water consumption increases accordingly to account for the

missing hot water intake.

For functional and technical reasons, it is not possible to operate

the machine exclusively with a hot water connection (without a

separate cold water intake).

Even if a hot water connection is present, the washing machine

must be connected to a cold water intake.

Installation and planning notes