Miele GDU 45/65 피팅 지침 매뉴얼 - 페이지 24

{카테고리_이름} Miele GDU 45/65에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele GDU 45/65 48 페이지. Decor set

Miele GDU 45/65 피팅 지침 매뉴얼
ö
Step 9.
Installing the toekick
In kitchens utilizing one continuous toe-
kick, this step is not necessary. In this
case install the toekick as instructed in
the Installation section of the dish-
washer Operations manual.
The included toekick will fit without
modification when:
– The machine is set to its maximum
height (legs fully extended), and
– the toekick is recessed as far as
possible (4 ").
If the machine height is less than maxi-
mum, or if the toekick is recessed less
than 4 ", the toekick must be shortened
(see following page).
After installation, carefully open the
dishwasher door to check that the
front panel does not hit the toekick.
If it does, remove the toekick and trim
it accordingly.
24
Step 10.
Adjusting the toekick
To adjust the depth (recess) of the
toekick, release the tension on the
spring clips as shown, and push the
mounting brackets in as far as
possible.