Miele Novotronic G 841 SC Plus 사용 설명서 - 페이지 16
{카테고리_이름} Miele Novotronic G 841 SC Plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Novotronic G 841 SC Plus 48 페이지. Miele novotronic dishwasher operating instructions
Miele Novotronic G 841 SC Plus에 대해서도 마찬가지입니다: 사용 설명서 (49 페이지)
페이지 인쇄
Before using for the first time
^ Press the "Start" button.
The "Start" indicator will light.
^ Turn the program selector to "Stop".
^ Turn off the dishwasher with the
"On/Off" button.
The programmed water hardness is
stored.
16
Checking the programmed water
hardness
^ Make sure the dishwasher is turned
off.
^ Turn the program selector to "Stop".
^ Press and hold the "Start" button and
at the same time turn on the dish-
washer with the "On/Off" button. Re-
lease the "Start" button within two
seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
^ Turn the program selector clockwise
until the "Start" indicator comes on.
The position where the "Start" indicator
comes on corresponds to the pro-
grammed water hardness (see table
"Programming the water softener").
^ Turn the program selector to "Stop".
^ Turn off the dishwasher.