Miele DA 219-2 작동 및 설치 지침 - 페이지 37

{카테고리_이름} Miele DA 219-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 219-2 44 페이지. Ventilation system
Miele DA 219-2에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Attaching the chimney

extension

The use of a chimney extension, allows

the hood to be installed at various

distances from the ceiling.

NOTE: The extension must be

intalled in relationship to the method

of venting; Extraction or

Recirculation.

Recirculation

The extension piece has vented

openings on one end.

These vents are required for recir-

culation mode and will be closest to the

ceiling when installed.

For air extraction, the vents are not

required and are covered by the

chimney.

Air extraction

^ Remove the protective foil from

chimney extension.

^ Bend the top hanging tabs 45°

inwards. This will make installing the

extension easier. Be careful of sharp

edges.

Recirculation

^ Pull the chimney extension slightly

outwards and snap over the upper

retaining plate B.

When installing for recirculation, ensure

that the vents are positioned so they

line up with the diverter.

Installation

Air extraction