Miele DA 219-2 작동 및 설치 지침 - 페이지 38
{카테고리_이름} Miele DA 219-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 219-2 44 페이지. Ventilation system
Miele DA 219-2에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)
페이지 인쇄
Installation
^ Screw the extension piece firmly to
the upper retaining plate using two
3.9 x 7.5 mm screws.
^ Cover the screws with the supplied
cap covers.
^ Only for recirculation:
With the slats pointing downwards,
install the recirculation vents through
the extension piece and into the
diverter.
38
Attaching the chimney
^ Fold the protective shield at the top.
^ Remove the adhesive backing from
the shield.
^ Stick the shield to the chimney
extension so that it is smooth and
flush with the bottom.
^ Remove the protective foil from the
chimney.
^ Remove the backing from the
adhesive strips on the protective
shield.
^ Attach the protective shield to the
front of the chimney so that it
protrudes slightly below the bottom
edge.