Miele DA 2270 EXT 작동 및 설치 지침 - 페이지 28

{카테고리_이름} Miele DA 2270 EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2270 EXT 40 페이지. Cooker
Miele DA 2270 EXT에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (40 페이지), 사용자 설명서 (40 페이지)

페이지 인쇄

Installation

Fitting the non-return flap

(not needed for recirculation mode)

^ If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted onto the

exhaust socket in the motor unit. The

flaps must open upwards.

DA 2250, DA 2270: 1 non-return flap

DA 2210: 2 non-return flaps

Building in

The rangehood is designed for

installation in wall units, rangehood

housing units, and above breakfast

bars or island areas.

Check prior to installation that the top of

the appliance will be accessible after

installation.

If this is not the case, install the exhaust

ducting and prepare the electrical

connection before installation.

^ Place the appliance in the cut-out

from below and align it.

^ Secure the rangehood by the frame

using 3.5 x 16 mm screws.

^ Before using the appliance for the

first time, take the grease filters out

and remove the protective foil from

the filter frame. Then replace the

grease filters.