Miele DA 2390 작동 및 설치 지침 - 페이지 24

{카테고리_이름} Miele DA 2390에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2390 40 페이지. Ventilation system
Miele DA 2390에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (36 페이지)

Installation



Before installation, it is important

to read the information given on the

following pages as well as the

"Warning and Safety instructions" at

the beginning of this booklet.

The cooker hood is intended for

installation in a wall unit, chimney unit

or above breakfast bars or island areas.

 Check prior to installation that the top

of the appliance will be accessible

after installation.

If this is not the case, install the exhaust

ducting and prepare the mains

connection before installation.

1 vent connection

for exhaust ducting  150 mm.

1 non-return flap

for fitting into the exhaust socket on

the motor unit (not needed for

recirculation mode). Depending on the

model, the non-return flap may already

be fitted.

4 M5 x 40 mm screws, 4 washers,

4 M5 nuts for securing the cooker

hood to an interim shelf.

10 M4 x 8 mm screws for securing the

cooker hood.

4 M4 x 12 mm screws for additional

securing of the cooker hood to uneven

surfaces.

Conversion kit for recirculation

mode

including directional unit, aluminium

hose and hose clips (the conversion kit

is not supplied and must be purchased

separately. See "Technical data").