Miele DA 2390 Operating And Installation Instructions - Page 24

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 2390. Miele DA 2390 40 pages. Ventilation system
Also for Miele DA 2390: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages)

Print Page
Miele DA 2390 Operating And Installation Instructions

Installation

Before installation

Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
The cooker hood is intended for
installation in a wall unit, chimney unit
or above breakfast bars or island areas.
 Check prior to installation that the top
of the appliance will be accessible
after installation.
If this is not the case, install the exhaust
ducting and prepare the mains
connection before installation.

Installation materials

1 vent connection
for exhaust ducting  150 mm.
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be fitted.
24
4 M5 x 40 mm screws, 4 washers,
4 M5 nuts for securing the cooker
hood to an interim shelf.
10 M4 x 8 mm screws for securing the
cooker hood.
4 M4 x 12 mm screws for additional
securing of the cooker hood to uneven
surfaces.
Conversion kit for recirculation
mode
including directional unit, aluminium
hose and hose clips (the conversion kit
is not supplied and must be purchased
separately. See "Technical data").