Miele DA 2390 Operating And Installation Instructions - Page 23

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 2390. Miele DA 2390 40 pages. Ventilation system
Also for Miele DA 2390: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages)

Print Page
Miele DA 2390 Operating And Installation Instructions

Changing a lamp

Only use the specified lamps.
Other lamps, e.g. halogen lamps,
may become damaged due to the
high generation of heat.
The lamps should be replaced with a
lamp of the same type:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................. 11427 or 12981
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
Alternatively the following lamps can be
used:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 11511
Wattage ........................................... 5 W
ILCOS D Code...... DR-5-H-GU10-50/54
These lamps have a different luminosity.
Only use lamps of the same type in the
cooker hood.
These lamps are available from Miele or
from specialist retailers.
Cleaning and care
 Switch off the fan and the lighting.
The lamps can get very hot when
in use.
Allow the lamps to cool down for a
few minutes before changing them.
 Disconnect the cooker hood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
 Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will then drop downwards.
 Grip the lamp, turn it anti-clockwise
and take it out.
 Screw the new lamp into the socket
and push it upwards. Please follow
the manufacturer's instructions.
23