Miele DA 2390 작동 및 설치 지침 - 페이지 27

{카테고리_이름} Miele DA 2390에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2390 40 페이지. Ventilation system
Miele DA 2390에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (36 페이지)

a Alternative vent connection at the back.

b The cooker hood is fastened in the cut-out using clamps. A solid installation

surface, e.g. made of wood, is required. Make sure that the structure can

support the load. Around the clamps, components such as supports and

ducting must be at least 25 mm from the cut-out.

c Alternatively, the cooker hood can be secured to 4 fixing points on an interim

shelf.

d Additional fixing points on the installation surface.

Safety distance between hob and cooker hood (S)

When planning the installation height of your cooker hood, the minimum safety

distance between the top of a cooker or hob and the bottom of the cooker hood

is as follows, unless a greater distance is specified by the manufacturer of your

cooking appliance.

See "Warning and Safety" instructions for further information.

Cooking appliance

Electric hob

Electric grill, deep fat fryer (electric)

Multi-burner gas hob,

total output ≤ 12.6 kW, no burner > 4.5 kW

Multi-burner gas hob,

total output > 12.6 kW and ≤ 21.6 kW,

no burner > 4.8 kW.

Multi-burner gas hob,

total output > 21.6 kW,

or multi-burner gas hob where one burner > 4.8 kW.

Single burner gas hob, output ≤ 6 kW.

Single burner gas hob, output > 6 kW and ≤ 8.1 kW.

Single burner gas hob, output > 8.1 kW

Installation

Minimum distance S

450 mm

650 mm

760 mm

Not possible

650 mm

760 mm

Not possible