Miele DA 2450 작동 및 설치 지침 - 페이지 21
{카테고리_이름} Miele DA 2450에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2450 32 페이지.
Miele DA 2450에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (32 페이지)
Changing a lamp
Use only the lamps specified for use
with this appliance.
Other lamps, e.g. halogen lamps,
may be damaged due to the high
generation of heat.
The lamps should be replaced with the
following:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 12981
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
These lamps are available from Miele.
Cleaning and care
Switch off the fan and the lighting.
The lamps can get very hot when
in use.
Allow the lamps to cool down for a
few minutes before changing them.
Disconnect the rangehood from the
electricity supply before replacing the
lamps (see "Warning and Safety
instructions").
Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will drop downwards.
Grip the lamp, turn it anti-clockwise
and take it out.
Screw the new lamp into the socket
and push it upwards. Please follow
the manufacturer's instructions.
21