Miele DA 2450 작동 및 설치 지침 - 페이지 23
{카테고리_이름} Miele DA 2450에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2450 32 페이지.
Miele DA 2450에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (32 페이지)
페이지 인쇄
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
The rangehood is intended to be built
into wall units, rangehood housing
units, and above breakfast bars or
island areas.
Check prior to installation that the top
of the appliance will be accessible
after installation.
If this is not the case, install the exhaust
ducting and prepare the mains
connection before installation.
Installation materials
Screws, 3.5 x 16 mm
for securing the rangehood.
The screws supplied are intended for
securing the rangehood to a solid
wooden cabinet floor with a
minimum thickness of 16 mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
Conversion kit for recirculation
mode
including directional unit, aluminium
hose and hose clips (the conversion kit
is not supplied and must be purchased
separately. See "Technical data").
Keep the following in a safe place:
Installation plan
See the installation plan for details on
the individual steps involved in the
installation of this appliance.
1 lever
for removing the lamps.
Installation
23