Miele DA 2906 EXT 작동 및 설치 지침 - 페이지 40

{카테고리_이름} Miele DA 2906 EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2906 EXT 48 페이지.

Electrical connection

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer cannot

be held liable for unauthorised work.

All electrical work should be

undertaken by a suitably qualified

and competent person in strict

accordance with current national and

local safety and building code

regulations.

The rangehood must be connected to a

mains electricity supply which

conforms with current local and

national regulations.

For extra safety, it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

Connection of this appliance should be

made via a suitable isolator which

complies with national and local safety

regulations and the On-Off switch

should be easily accessible after the

appliance has been built in. When

switched off, there must be an all-pole

contact gap of 3 mm in the switch

(including switch, fuses and relays

according to EN 60335).

The connection data is given on the

data plate (See "After sales service").

Ensure that this data matches the

household mains supply.