Miele DA 2906 EXT 작동 및 설치 지침 - 페이지 42

{카테고리_이름} Miele DA 2906 EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2906 EXT 48 페이지.

Activating Con@ctivity 2.0

Activating the cooktop

 While the rangehood is searching for

the radio connection, start activating

the cooktop.

More information about this can be

found in the Operating instructions

for the cooktop.

 When the cooktop registers that

connection has been established,

confirm activation on the rangehood

with the run-on option control 515.

All indicators will go out.

 Confirm the activation on the

cooktop.

The Con@ctivity 2.0 function can now

be used.

If you do not confirm your selection

within 4 minutes, activation will not take

place.

You only need to carry out the

activation procedure once. If the

appliances are disconnected from the

electricity supply, during a power cut

for example, they will still remain

activated.

 If connection cannot be established

despite activating the Con@ctivity

function on the rangehood and

cooktop, the function must be

deactivated on both appliances and

then the procedure repeated.

 Deactivation on the rangehood is

carried out in the same way as

activation, by selecting the ""

control instead of "".

 To deactivate the cooktop, please

refer to the Operating instructions

supplied with it.

Please bear in mind that disabling the

signal will also disable any remote

control function and this will have to

be activated again.