Miele DA 2906 EXT 작동 및 설치 지침 - 페이지 43

{카테고리_이름} Miele DA 2906 EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2906 EXT 48 페이지.

If the connection has been lost between

the remote control and the rangehood,

the remote control and the remote

control function on the rangehood must

be signed on again. To do this, the

remote control function on the

rangehood and the remote control must

first be signed off.

Signing on/off the remote control

Signing on and off must be done at the

same time on the rangehood and the

remote control. Signing on/off mode

has to be accessed on the rangehood

first, then on the remote control.

Accessing signing on/off mode on

the rangehood

 Press the run-on option control

515 for approx. 10 seconds until

the indicator for the power setting 1

lights up.

 Then press in turn,

– the "" control,

– then the "" control,

– then the lighting control .

 Then access the signing on/off mode

on the remote control immediately.

Accessing signing on/off mode on

the remote control

 Press both arrow controls  at the

same time and hold for about 5

seconds until the remote control LED

flashes.

 Press the lighting control .

Signing off

 In signing on/off mode press the ""

control on the rangehood and then

on the remote control.

The remote control LED will flash

steadily.

After approx. 10 seconds the remote

control LED will flash on and off twice

with a longer interval between the

flashes. The remote control has now

been signed off. The LED will go out

after a short while.