Miele DA 316 i 운영 및 설치 매뉴얼 - 페이지 25

{카테고리_이름} Miele DA 316 i에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 316 i 40 페이지. For cooker hood

The appliance is designed for vent

ducting ø 150 mm.

If ø 125 mm is required:

Place the reducing collar supplied

on the vent socket and turn it to se-

cure it in position (see "Connection

for air extraction").

If ø 100 mm is required:

Fit the ø 125 mm reducing collar

onto the vent socket. Then fit the ø

100 reducing collar over it (see "Con-

nection for air extraction").

Place the reducing collar for ø 125

mm on the vent socket as described

previously.

Now fit the two runners into the wall unit.

The positioning will depend on the type

of lightshield being fitted.

Appliance fitted with a DFB lightshield:

Draw a vertical line approx. 20 cm

long on both the left and right sides

of the wall unit 100 mm in from the

front edge (see illustration).