Miele DA 3496 작동 및 설치 지침 - 페이지 24
{카테고리_이름} Miele DA 3496에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3496 48 페이지.
Miele DA 3496에 대해서도 마찬가지입니다: 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (48 페이지)
페이지 인쇄
Cleaning and care
Changing a light bulb
The bulbs should be replaced with the
following:
Bulb type .............................. LED, GU10
Power ............................................... 3W
Replacement bulbs are available from
Miele.
Pull out the fume deflector, and
remove the grease filter as described
above.
Turn off the blower and the lighting.
Please note that bulbs become
very hot during use.
They can cause burns even after
being shut off for some time.
Allow the bulbs to cool down for a
few minutes before changing them.
Remove the charcoal filter if the hood
is being used in recirculation mode.
Disconnect the hood from the
electrical supply before replacing the
bulbs (see "IMPORTANT SAFETY
INSTRUCTIONS").
24
Reach through the opening in the
safety panel and push the lighting
unit slightly downwards.
Turn the bulb counter-clockwise and
pull it out.
Screw the new bulb into the socket
and push it upwards. Please follow
the manufacturer's safety
instructions.
Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.