Miele DA 3496 Operating And Installation Instructions - Page 24
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 3496. Miele DA 3496 48 pages.
Also for Miele DA 3496: Operating And Installation Instructions (48 pages), Operating And Installation Instructions (48 pages), Operating And Installation Instructions (48 pages)
Print Page
Cleaning and care
Changing a light bulb
The bulbs should be replaced with the
following:
Bulb type .............................. LED, GU10
Power ............................................... 3W
Replacement bulbs are available from
Miele.
Pull out the fume deflector, and
remove the grease filter as described
above.
Turn off the blower and the lighting.
Please note that bulbs become
very hot during use.
They can cause burns even after
being shut off for some time.
Allow the bulbs to cool down for a
few minutes before changing them.
Remove the charcoal filter if the hood
is being used in recirculation mode.
Disconnect the hood from the
electrical supply before replacing the
bulbs (see "IMPORTANT SAFETY
INSTRUCTIONS").
24
Reach through the opening in the
safety panel and push the lighting
unit slightly downwards.
Turn the bulb counter-clockwise and
pull it out.
Screw the new bulb into the socket
and push it upwards. Please follow
the manufacturer's safety
instructions.
Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.