Miele DA 403 작동 및 설치 지침 - 페이지 14

{카테고리_이름} Miele DA 403에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 403 36 페이지. Ventilation system
Miele DA 403에 대해서도 마찬가지입니다: 작동 및 설치 지침 (32 페이지), 제품 치수 (2 페이지), 설치 매뉴얼 (2 페이지), 운영 및 설치 매뉴얼 (36 페이지), 작동 및 설치 지침 (32 페이지), 작동 및 설치 지침 (36 페이지)

Operation

Filter timers

Grease filters

A timer monitors the hours of fan

operation. The indicator for the grease

filter will light after 30 hours of

operation. The grease filters must then

be cleaned.

After the grease filters have been

cleaned and put back in place, the

grease filter timer must be reset.

^ To do this, press the grease filter

button for approx. 3 seconds.

The indicator will go out.

Charcoal filter

Recirculation mode only

The timer for the charcoal filter is not

preset. Please program this timer, see

"Operation - Reprogramming the

charcoal filter timer".

The charcoal filter indicator will light

once the selected time has elapsed.

The charcoal filter must then be

replaced and the charcoal filter timer

reset.

^ To do this, press the charcoal filter

button for approx. 3 seconds.

The indicator will go out.

^ Press the On/Off button to turn the

fan on.

^ Press and hold the grease or

charcoal filter button.

The number of flashing "–/+" indicators

show the percentage of programmed

hours that have been used.

1 indicator = less than 25 %

2 indicators = less than 50 %

3 indicators = less than 75 %

4 indicators = less than 100 %

This information will remain stored in

memory in the event of a power failure.