Miele DA 403 Operating And Installation Instructions - Page 14

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 403. Miele DA 403 36 pages. Ventilation system
Also for Miele DA 403: Operating And Installation Instructions (32 pages), Product Dimensions (2 pages), Install Manual (2 pages), Operating And Installation Manual (36 pages), Operating And Installation Instructions (32 pages), Operating And Installation Instructions (36 pages)

Print Page
Miele DA 403 Operating And Installation Instructions
Operation

Filter timers

Grease filters
A timer monitors the hours of fan
operation. The indicator for the grease
filter will light after 30 hours of
operation. The grease filters must then
be cleaned.
After the grease filters have been
cleaned and put back in place, the
grease filter timer must be reset.
^ To do this, press the grease filter
button for approx. 3 seconds.
The indicator will go out.
Charcoal filter
Recirculation mode only
The timer for the charcoal filter is not
preset. Please program this timer, see
"Operation - Reprogramming the
charcoal filter timer".
The charcoal filter indicator will light
once the selected time has elapsed.
The charcoal filter must then be
replaced and the charcoal filter timer
reset.
^ To do this, press the charcoal filter
button for approx. 3 seconds.
The indicator will go out.
14

Checking the filter timers

^ Press the On/Off button to turn the
fan on.
^ Press and hold the grease or
charcoal filter button.
The number of flashing "–/+" indicators
show the percentage of programmed
hours that have been used.
1 indicator = less than 25 %
2 indicators = less than 50 %
3 indicators = less than 75 %
4 indicators = less than 100 %
This information will remain stored in
memory in the event of a power failure.