HP 23-C130 빠른 설정 매뉴얼 - 페이지 18

{카테고리_이름} HP 23-C130에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 23-C130 25 페이지. Quick setup guide

Speakers and sound

Symptom

Possible solution

No sound is

For Windows 7:

produced.

If you are using built-in monitor speakers, use the monitor front-panel Volume button to

adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and ensure

that audio is enabled and that the volume is set appropriately.

Ensure that you connected powered (active) speakers and that they are turned on.

Turn off your computer, and then unplug and reconnect the speakers. Ensure that the

speakers are connected to an audio connector, not a Line In or headphone connector.

To resume from Sleep mode, press the Sleep button (select models only), or press Esc.

Unplug headphones if they are connected to your computer (or speaker system).

Volume is very low

Ensure that you connected the speakers to the Audio Out (lime green) connector on the

or unsatisfactory.

back of the computer. (Additional audio connectors are used for multiple-channel

speakers.) Detached non-powered speakers (speakers without a separate power source,

such as batteries or a power cord) do not produce satisfactory sound. Replace the non-

powered speakers with powered speakers.

Symptom

Possible solution

Internet programs do

not start

automatically.

Chapter 5 Troubleshooting

Click Start, click Control Panel, click Action Center, and then click

Troubleshooting.

Under Hardware and Sound, click Troubleshoot and audio playback.