HP 234664-002 - ProLiant - ML330T02 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} HP 234664-002 - ProLiant - ML330T02에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 234664-002 - ProLiant - ML330T02 15 페이지. Visualization and acceleration in hp proliant servers
HP 234664-002 - ProLiant - ML330T02에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), 구현 매뉴얼 (35 페이지), 기술 백서 (12 페이지), 펌웨어 업데이트 (9 페이지), 개요 (20 페이지), 구현 매뉴얼 (26 페이지), 소개 매뉴얼 (22 페이지), 문제 해결 매뉴얼 (18 페이지), 구현 매뉴얼 (11 페이지), 설치 매뉴얼 (2 페이지), 구성 매뉴얼 (2 페이지), 소개 매뉴얼 (19 페이지), 업데이트 매뉴얼 (9 페이지), 업데이트 매뉴얼 (16 페이지), 소개 매뉴얼 (10 페이지), 기술 개요 (9 페이지)

NOTE:

If while running the Hardware Wizard you are unable to locate the

appropriate driver for the modem, contact the modem

manufacturer or visit their website to locate the driver.

Installation process for supported ProLiant ML100 series

servers

To install Windows SBS 2003 R2 onto a supported ProLiant ML100 series server, complete the steps

outlined in the following sections:

• Part 1—Creating storage media for use during the installation

• Part 2—Installing Microsoft Windows SBS 2003 R2

• Part 3—Installing and configuring modem(s) and NIC(s)

Part 1: Creating storage driver media for use during the Windows SBS

2003 R2 installation

There are two methods for gathering the required storage drivers for use during the installation

process. Choose either method to create the storage driver media.

Follow the procedures below to create the necessary storage component. Additionally, you may

choose to extract the driver for the NIC(s), if Microsoft Windows SBS 2003 R2 does not contain the

drivers for it. NIC drivers are accessible through the Driver - Network category link presented in Step

Go to the software and drivers website by accessing the HP Support and Drivers website:

www.hp.com/cgi-bin/hpsupport/index.pl.

Select your server(s) from the Family drop-down list box, select Microsoft Windows Server 2003

from the Operating System drop-down list box, and click the locate software >> button. This

procedure takes you to the Locate page, which lists the available software by categories.

Click the Driver – Storage Controller category link.

Select the Smart Component (driver) for the primary storage controller used in the server by

clicking the software version link listed in the Current Version column next to the desired Smart

Component. This procedure takes you to the Download page, which lists the enhancements, fixes,

and installation information.

Click the download >> button to download the file to a diskette or a USB disk. The website

contains information that explains how to handle the downloaded package.

Method 2: Downloading drivers from the Server Support and

Documentation CD

If the Microsoft Windows SBS 2003 R2 media does not contain the base driver for the primary

storage controller and the NIC, create a diskette or a USB disk containing the driver for use later in

the installation process.

Insert the Server Support and Documentation CD into the CD-ROM drive on a system currently

running Microsoft Windows.

Review the Licensing Agreement, and click the Agree button if you agree.