HP 239158-999 - Mini Tower - Power Supply 250 Watt 백서 - 페이지 5

{카테고리_이름} HP 239158-999 - Mini Tower - Power Supply 250 Watt에 대한 백서을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 239158-999 - Mini Tower - Power Supply 250 Watt 6 페이지. Hp guide to system recovery and restore
HP 239158-999 - Mini Tower - Power Supply 250 Watt에 대해서도 마찬가지입니다: 새로운 기능 매뉴얼 (16 페이지), 보증 (8 페이지), 빠른 설정 매뉴얼 (12 페이지), 지원 목록 (34 페이지), 지원 전화번호 (19 페이지)

페이지 인쇄
HP 239158-999 - Mini Tower - Power Supply 250 Watt 백서
W
P
HITE
APER
(cont.)
. .
The console provides commands you can use to do simple operations such as changing to a
. .
. .
different directory or viewing a directory, and more powerful operations such as fixing the boot
. .
sector. You can access Help for the commands in the Recovery Console by typing help at the
. .
. .
Recovery Console command prompt.
. .
. .
Once you have access to the Windows installation you can try to correct potential problems with
. .
. .
the file system by executing the command chkdsk /f /r.
. .
. .
. .
NOTE: For more information on how to use the recovery console, including enabling and
. .
disabling services, replacing corrupted system files and other operations, please review the
. .
. .
Microsoft KnowledgeBase or your online documentation by searching on the keywords:
. .
"recovery console".
. .
. .
. .
. .
. .
R
T
E P A I R I N G
H E
. .
. .
. .
If you are unable to repair the software configuration using the methods described above, you can
. .
reinstall the Windows operating system on top of the current installation in an attempt to replace
. .
. .
damaged or corrupted components.
. .
. .
The steps to perform repair installation are as follows:
. .
. .
. .
NOTE: Make sure that the system is configured to boot first from the CD-ROM drive, then from
. .
the hard drive. You can verify or change device boot order using the Computer Setup (F10) Utility.
. .
. .
For more information, refer to the Computer Setup (F10) Utility Guide provided with the
. .
computer.
. .
. .
. .
. .
1.
Insert the Windows 2000 or Windows XP CD-ROM into the CD-ROM drive.
. .
. .
2.
Click Start > Shut Down, then select Restart from the drop-down list.
. .
. .
. .
3.
In the Shut Down Windows dialog, click OK.
. .
. .
4.
Press any key to start the computer from the CD-ROM drive when you are prompted to do so.
. .
. .
5.
On the Welcome to Setup page, press the Enter key.
. .
. .
6.
On the Setup Windows page, press R to repair the installed copy of the Windows operating
. .
. .
system.
. .
. .
7.
Follow the installation instructions displayed on the screen to complete the repair process.
. .
. .
. .
U
R
S I N G T H E
E S T O R E
. .
. .
. .
The Restore Plus! CD is used to perform a destructive restore of the PC. This process will restore
. .
the PC to a near-factory shipping state with software and drivers provided by HP. The process will
. .
. .
format and partition the first bootable hard disk volume in the computer. The Restore Plus! process
. .
does not affect data contained on any hard disk volumes other than the first bootable hard disk
. .
. .
(usually the IDE hard disk connected as master to the primary IDE controller).
. .
. .
If you have changed the controller boot order processing within the system BIOS (located by
. .
pressing F10 during system boot) to make a SCSI controller the first bootable device, the Restore
. .
. .
Plus! process will use the first SCSI hard disk in the SCSI chain for restoration purposes.
. .
. .
The Restore Plus! CD displays a step-by-step interactive wizard that prompts for all necessary CD
. .
. .
media, then automates the installation of the Windows operating system and HP-supplied software
. .
components.
. .
. .
PSG#HJ_DT_010303_1A
5
I
O
N S T A L L E D
P E R A T I N G
P
! C D
L U S
S
Y S T E M